Alcohol Torch Bottle

This torch can be used to burst bubbles in finish or singe thread fibers on wraps. This is not for use with flammable finishes.

Directions for use:

1.Fill with denatured alcohol to within ¾ of top.

2.Gently squeeze bottle to produce pin point horizontal flame.Too much pressure may cause alcohol to spill over the top and burn plastic bottle or will distort flame.

3.When squeezing, do not tilt bottle to an angle greater than 60 degrees.

4.To adjust flame angle, bend the small brass tube (ensure it is not lit and cool first).

5.Use metal top to snuff out the flame when finished.